Cooling Tower Water Management
Cooling towers dissipate heat from recirculating water used to cool chillers, air conditioners, or other process equipment to the ambient air. Heat is rejected to
Cooling towers dissipate heat from recirculating water used to cool chillers, air conditioners, or other process equipment to the ambient air. Heat is rejected to
Drift removal is more than a function of simply putting a drift eliminator into a tower. Installation quality and workmanship are some of the largest
By Jim Wallis and Rich Aull, July 1, 2005 There are two broad categories of fills: splash and film. Splash fills typically are used where water quality is
Brentwood’s AccuPac XF75, XF75IL, and XF75ID crossflow fills are suitable replacement fills for all manufacturers’ crossflow cooling towers, including Marley, BAC, Evapco, and more. Specially
Source: www.mt-online.com Written by William F. Harfst, Harfst and Associates, Inc. Wednesday, October 1, 2008 Any amount of wasted water is too much. Perhaps it’s time to
Source: Process-Cooling.com Many managers do not consider or are not aware of the role of cooling towers and the application of cold water. A cooling
In the past, redwood was selected for use in cooling towers because of its high strength-to-weight ratio, availability, ease of use, low cost, and natural
The main safety issue is with the fan blades themselves coming out of the fan: large projectiles can be sent many meters across the plant
CM Brown, PJ Nuorti, RF Breiman, AL Hathcock, BS Fields, HB Lipman, GC Llewellyn, J Hofmann and M Cetron Centers for Disease Control and Prevention